Connecting The Port Replicator - Panasonic CF-VEB612A Operating Instructions Manual

Connecting/Disconnecting the Port Replicator;
Before Connecting and Disconnecting the Port Replicator
Make sure to power off the computer.
♦CAUTION^
• The port replicator can only be used when the AC adapter is connected. It cannot be
used with the battery pack mounted on the computer as the only power source. (No
power is supplied in this case.) Note that if power is interrupted or if the AC adapter is
unplugged accidentally while the port replicator is in use, the power supply to the
computer will be cut off and data will be lost, regardless of the current suspend or
hibernation mode settings.
• Do not connect or disconnect the port replicator while the computer is powered on or in
the suspend or hibernation mode. Doing so could cause seriously damage your com¬
puter.
Connecting the Port Replicator
Power off the computer.
*
DC-IN Connector
Connect the plug of the AC adapter (CF-AA159)
that came with the computer to the DC-IN jack of
the port replicator and plug the other end into an
AC outlet. (The AC adapter (CF-AA159) may also
be purchased as an optional part.)
♦CAUTIONS
• Do not use other than the specified AC adapter (CF-
AA159).
• Refer to the "Operating Instructions" that came with
the computer for information on proper handling of
the AC adapter and AC cord.
• Before unplugging the AC adapter, make sure to power
off the computer.
6