Philips HR2870 User Manual page 14

EnglisH
1
guarantee & service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you will find its phone number in the worldwide
guarantee leaflet). If there is no Customer Care Centre in your country,
turn to your local Philips dealer or contact the Service Department of
Philips Domestic Appliances and Personal Care BV.
troubleshooting
Problem
The
appliance
does not
work
The blade
unit is
blocked.
Cause
The appliance is
equipped with a built-
in safety lock. If the
parts have not been
properly assembled
onto the motor unit,
the appliance does not
work.
The appliance is
equipped with a
thermal cut-out. If the
appliance overheats, it
automatically cuts off
the power supply.
There is too much
food in the appliance.
Solution
Check whether the parts have
been assembled properly (see
chapter 'Using the appliance').
Pull the plug out of the wall
socket and let the appliance
cool down for 30 minutes.
Then put the plug back into
the wall socket and switch the
appliance on again.
Switch the appliance off and
process a smaller quantity.