Technics SA-DA20 Operating Instructions Manual page 25

;
!
i Making a recording j [
1 2
--^ INPUT SELECTOR
, Note I
• You cannot record a source connected through a digital terminal..
When recording CD, DVD, or TV, ensure the source is connected
through the corresponding analog terminals pages 6-7) and
"ANALOG" input is selected page 18).
• When.you select DVD 6CH INPUT mode, only sound from the
front left and right channels is recorded.
|j}336iigBi@gnia(^gM5egi!^
You can record to a tape deck connected to TAPE REC (OUT) or to
a VCR connected to VCR 1 OUT.
See the recording unit's operating instructions for details on how to
prepare it for recording.
When recording with a tape deck, you can record any source
except TAPE.
When recording with a VCR, you can record any source except
TAPE or VCR
1. ' ' ^
*
I)
Turn [INPUT SELECTOR] to select the
source to be recorded.
2
in
TAPE MONITOR
2
If you selected "VCR 2" in step 1, set
[.■. VCR 2, --- VCR 3] to the required
position.
3
Begin recording.
Follow your recording unit's operating instructions.
4
Begin the source to be recorded.
Follow your equipment's operating instructions.
To monitor sound being recorded onto a tape deck
It is possible to check the sound being recorded if your tape deck is '
a 3 head system.
Press [TAPE MONITOR] on this unit and
set the monitor button on the tape deck to
"TAPE".
Press fTAPE MONITOR] once again to turn it off.