Dealer Checklists 15 - Woods GBC48 Operator's Manual

DEALER PRE-DELIVERY CHECKLIST
(DEALER'S RESPONSIBILITY)
Inspect the equipment thoroughly after assembly to
be certain it is set up properly before delivering it to
the customer. The following check list is a reminder of
points to inspect. Check off each item if it is found satis-
factory or after proper adjustment is made.
Check that all safety decals are installed and in
good condition. Replace if damaged.
Properly attach implement to tractor and make
all necessary adjustments.
Check all bolts to be sure they are properly
torqued.
Check that all cotter pins and safety pins are
properly installed. Replace if damaged.
MAN0179
( 06/07/2023 )
MAN0179_2023-06.indd 15 MAN0179_2023-06.indd 15
DEALER CHECKLISTS
DEALER DELIVERY CHECKLIST
(DEALER'S RESPONSIBILITY)

Dealer Checklists 15

Show customer the safe, proper procedures
to be used when mounting, dismounting, and
storing equipment.
For mounted units, add wheel weights, ballast in
front tires, and/or front tractor weight to enhance
front end stability. A minimum 20% of tractor and
equipment gross weight must be on front tractor
wheels. When adding weight to attain 20% of
tractor and equipment weight on front tractor
wheels, you must not exceed the ROPS weight
certification. Weigh the tractor and equipment.
Do not estimate!
Show customer how to make adjustments.
Present Operator's Manual and request that
customer and all operators read it before
operating equipment. Point out the manual safety
rules, explain their meanings and emphasize the
increased safety hazards that exist when safety
rules are not followed.
Point out the safety decals. Explain their meaning
and the need to keep them in place and in good
condition. Emphasize the increased safety
hazards when instructions are not followed.
Explain to customer the potential crushing
hazards of going underneath raised equipment.
Instruct customer that service work does not
require going underneath unit and never to do
so.
Make customer aware of optional equipment
available so that customer can make proper
choices as required.
2/8/24 9:43 AM 2/8/24 9:43 AM