Adjusting Top Link; Backfilling - Woods GBC48 Operator's Manual

Figure 1. 3-Point Lower Lift Arms Connected
Figure 2. Top Link Connected
Category 0
1. Remove cap screw (29), sleeve (7), lock washer
(27), and hex nut (26) from lower hole on A-frame
bars as shown in Figure 3.
2. Replace cap screw, sleeve, lock washer, and hex
nut into top hole on A-frame bars.
3. Place tractor 3-point lower lift arms over inner hitch
pins.
4. Secure with safety pins (not provided).
5. Connect tractor top link by inserting tractor clevis pin
into lower hitch point on A-frame bars and secure.
MAN0179
( 06/07/2023 )
MAN0179_2023-06.indd 9 MAN0179_2023-06.indd 9
29
7
CD6170-1
Figure 3. Sleeve Locations
Quick Hitch (Category 1 Only)
The GBC48 will attach to a Category 1 quick hitch.
1. Use Bushing Kit 1004653 when using a quick cou-
pler. See parts section for a list of parts.
2. Place bushings over mounting pin and secure into
position.
3. Align quick hitch with mounting pins and sleeve in
lower hole on box scraper's A-frame bars.

ADJUSTING TOP LINK

The box scraper is leveled by adjusting the length of
the tractor's top link.
• Shortening the top link will deepen the scarifier tooth
penetration.
• Lengthening the top link will provide better scraping
and leveling action.
Experience will allow the operator to determine the
best setting for each application.

BACKFILLING

1. Raise or remove scarifier shanks (see page 11).
2. Lower the blade to the ground and back up into the
fill material.
3. Shorten the top link to raise the cutting blade and
control how much the blade digs in.
Operation 9
Category 0
Category 1
27
26
2/8/24 9:43 AM 2/8/24 9:43 AM