Assemble Box Scraper; Optional Quick Hitch Pin Kit - Woods GBC48 Operator's Manual

ASSEMBLE BOX SCRAPER

1. Place A-frame bars (6) over mounting pins on the
inside of scraper frame.
2. Secure with lock washers (30) and hex nuts (31)
previously removed from mounting pins.
3. Attach A-frame support bars (8) to the scraper frame
and secure with cap screws (28), lock washers (27),
and hex nuts (26) previously removed.
4. Remove cap screw (29), sleeve (7), lock washer
(27), and hex nut (26) that secure the A-frame bars
together.
5. Align A-frame support bars with the lower hole on
A-frame bars and secure with cap screw, sleeve,
lock washer, and hex nut previously removed.
NOTE: A-frame support bars must be on the out-
side of the A-frame bars as show in Figure 11.
CD6163B-3
6. A-frame bars (set)
7. Sleeve, .88 x 1.88 x 1.25
8. A-frame support bars
26. 3/4 NC Hex nut
27. 3/4 Lock washer
28. 3/4 NC x 2 Cap screw
29. 3/4 NC x 4-1/2 Cap screw
30. 7/8 Lock washer
31. 7/8 Hex nut
Figure 9. Box Scraper Assembly
14 Assembly
MAN0179_2023-06.indd 14 MAN0179_2023-06.indd 14
6
8
6
7
Figure 10. A-frame Bars Assembled
28
Figure 11. A-frame Support Bars Assembled to
A-frame Bars

OPTIONAL QUICK HITCH PIN KIT 1004653

2
CD6222
1
Figure 12. Optional Quick Hitch Pin Kit
Install sleeve (1) over lower 3-point pin and secure with
klik pin (2).
31 30
26 27 29
DP5
27 26
8
DP6
MAN0179
( 06/07/2023 )
2/8/24 9:43 AM 2/8/24 9:43 AM