Klarstein BIGBITE Manual page 32

EN
32
Light on/off
Briefly press the LIGHT key to switch the light on. Press the key again to switch the
light off.
Setting the light color
Press and hold the light key to set the light color. The display shows [0]. Now
briefly press the speed key several times to adjust the light color from [L1] to [L9]:
L1 = white
L4 = blue
L7 = orange
After setting the desired color, long press the LIGHT button again to complete the
setting.
Enable WIFI
In standby mode, long press the WIFI button to activate the WIFI function. The
WIFI icon will start flashing. Set up the connection as described in the chapter
„Device Control by Smartphone". As soon as the connection is successful, the WIFI
symbol lights up continuously. If no connection is established within 3 minutes,
the WIFI icon stops flashing and the device automatically switches to standby
mode.
L2 = red
L5 = yellow
L8 = cyan
L3 = green
L6 = purple
L9 = green-yellow