Philips BDP5320 User Manual page 45

Category
Ratings Lock Rating All
• Refer to Level
8 [Adult]
page 52 for
to
more
1 [Kid Safe]
information.
New PIN
Network Connection
Connection Test
• Refer to
pages 53-57
Network Enable
for more
Selection (Wired)
information.
Enable
(Wireless)
Disable
Disclaimer
LIST OF SETTINGS
Menus / Options
Standard
Manual IP Address Setting
DNS Setting
Proxy Setting
Connection Speed
BD-Live Setting
Network Status
Wireless Find wireless network WEP/WPA Authenti-
Router
Manually enter your
SSID
Wireless Router Status
Advanced Standard
Settings
Manual IP Address Setting
DNS Setting
Proxy Setting
BD-Live Setting
Network Status
Yes
No
Sets the rating level for the disc
playback.
Sets the new password for the
"Ratings Lock" setting.
Perform a network connection test.
After you change IP address or DNS
setting, always perform this test.
If you select "Standard", connection
test will automatically start.
Auto(DHCP) Set the IP address. In most cases, you
can connect to the Internet without
Manual IP
making any changes to the default
Address
setting.
Subnet
Mask
Default
Gateway
Auto(DHCP) Set the DNS setting. In most cases,
you can connect to the Internet
Manual Primary
without making any changes to the
DNS
default setting.
Secondary
DNS
Do Not Use Set the proxy server. In most cases,
you can connect to the Internet
Use Proxy
without using proxy server.
Address
Proxy
Port
Auto Set the connection speed. In most
cases, you can connect to the
10BASE Half
Internet without making any changes
10BASE Full
to the default setting.
100BASE Half
100BASE Full
Allow You can restrict Internet access when
BD-Live functions are used.
Limited Allow
Prohibit
You can check the current status of
the network setting.
Set up the connection to the wireless
cation router and enter the WEP/WPA key
required for wireless network connection.
You can check the current status of
the wireless router setting.
If you select "Standard", connection
test will automatically start.
Set the IP address. In most cases, you
can connect to the Internet without
making any changes to the default
setting.
Set the DNS setting. In most cases, you can
connect to the Internet without making any
changes to the default setting.
Set the proxy server. In most cases,
you can connect to the Internet
without using proxy server.
You can restrict Internet access when
BD-Live functions are used.
You can check the current status of
the network setting.
Deactivate the network connection.
Displays the network service disclaimer.
Description
EN
EN 45