Table of Contents
Advertisement
2.1
Initial Inspection
We have carefully inspected the MIC-300 series mechanically and electrically before
shipping. It should be free of marks and scratches and be in perfect working order
upon receipt. As you unpack the MIC-300 series, check it for signs of shipping dam-
age (damaged box, scratches, dents, etc.). If it is damaged or fails to meet specifica-
tions, notify our service department or your local representative immediately. Also
notify the carrier. Retain the shipping carton and packing material for inspection by
the carrier. After inspection, we will make arrangements to repair or replace the unit if
necessary.
Warning! We highly advise that only qualified and experienced personnel handle
the installation or removal of components and they should exercise the
utmost caution during these tasks.
Warning! Service personnel must ensure that the power cord is disconnected
before working on any component. After servicing, the ground wire must
be securely connected before plugging in the power cord.
2.2
The MIC-300A Illustration
The MIC-300A series are designed to be installed and maintained easily. The MIC-
300A series configurations are shown below.
PN
Description
MIC-300A 3U CPCI-S 84HP
MIC-300A-S1S1
Chassis with 8-slot BP
MIC-300A 4U CPCI-S 84HP
MIC-300A-S1S3
chassis with 8-slot BP
MIC-300A 4U CPCI-S 44HP
MIC-300A-S1S4
chassis with 8 slot BP
2.3
Installation Procedures
2.3.1
Card Installation and Removal
The CompactPCI® Serial connectors are firm and rigid, and require careful han-
dling while plugging and unplugging. Improper installation of a card can easily
damage the backplane of the enclosure.
System slots usually have obvious indicators (e.g. red card guide rail, triangle
mark enclosing the slot number on the backplane, etc.). The system card can be
installed only in the system slot. Do not insert the system card into any other
slot, or insert a peripheral card into the system slot.
The PSU slot also has an obvious indicator such as a green card guide rail in a
enclosure
The insert/eject handles on CompactPCI® Serial cards help users to install and
remove the cards easily and safely. Follow the procedures below to install a
card into a enclosure:
MIC-300A User Manual
Chassis
Backplane
Power
Slot QTY
slot
Slot
21
8
2
21
8
2
11
8
2
8
Backplane
Fan RIO Dimension (W×D×H)
QTY
482.60x250x132.55
1
√
×
mm
1
√
×
482.60x265x177mm
1
√
×
279.40x265x177mm
Advertisement
Table of Contents
