Table of Contents
Advertisement
User Manual
5.3 Break Down without Handles
1. Join strap hooks on top of the Porter and tension straps tight against
the frame (Fig 17).
Figure 17
2. Turn the Porter upside down (Fig 18).
3. Remove the lynch pin and slide wheel off the axle (Fig 19).
4. Replace lynch pin onto axle and lock (Fig 20).
Figure 20
5.4 Break Down with Handles
1. Join strap hooks on top of the Porter and tension straps tight against
the frame (Fig 21).
Pg 7
Figure 18
Figure 19
Figure 21
2. Remove quick release pins from handle and fold handle over top of
the Porter (Fig 22).
Figure 22
3. Turn the Porter upside down then remove the lynch pin and slide
wheel off the axle (Fig 23).
Figure 23
4. Replace slide lynch pin back into axle and lock (Fig 24).
5. Remove quick release pins from second handle and fold handle over
the Porter axle (Fig 25).
6.0 Attach Rescue Litter to the Porter
Most styles of rescue litters, ski-patrol toboggans, and backboards can
be attached to the Porter. Attach the strap hooks to the appropriate rail,
handholds, or other element of the rescue litter.
If necessary, the straps can be used full length and wrapped under and
over (completely around) the rescue device. Hooks are then joined and
straps are tensioned to hold the device tight against the rescue litter
supports.
1. Release tension on the straps and separate hooks.
2. Place rescue litter on the Porter and center it over the wheel.
3. Attach all 4 hooks to top rail of rescue litter.
4. Tension both straps until rescue litter is tight against rescue litter
supports.
5. Verify that handles on ratchets are closed.
Porter Transport System
Figure 24
Figure 25
©Traverse Rescue, LLC | TR111v03
Advertisement
Table of Contents
