Table of Contents
Advertisement
E]
Using the timer during performance
If you have an audio timer, it can be used to start a performance
at any time you desire.
(Turn on the DX-6800 (DX-3800) and the amp which is con-
nected to the DX-6800 (DX-3800).
at
@ Insert a compact disc into the DX-6800
(DX-3800) disc tray.
Amplifier
output
aah
Timer
; @ Set the time on the timer.
signal cord
Cis
@
For more details, please consult the section which explains
'
the operations of the timer.
DX-6800
:
:
ct
:
;
(DX-3800)
ia)
© When the time specified arrives, the CD player's auto-play
eR
Cates
function will begin the performance automatically.
Troubleshooting guide
Trouble
Power switch is pressed but power does | @ Power cord plug is not properly con-
@ Insert plug firmly.
not come on.
nected to AC outlet.
Disc loaded but play does not begin.
@ Disc is loaded upside-down.
@ Disc is dirty.
@ Dew on pickup.
@ Load disc with the label side facing upward.
® Clean the disc.
@ Place unit in warm place for about one hour.
No sound.
@ Incomplete connections.
@ Improper input selector switch setting
on amplifier.
® Disc is dirty.
® Clean the disc.
® Disc is scratched.
@ Use another disc.
@ Unit has been exposed to a strong
@ Place the unit in a more stable location.
bump.
Search time (when moving to a specific | @ Disc is dirty.
@ Clean the disc.
track) is extremely long.
® Disc is scratched.
@ Use another disc.
Track numbers cannot be stored in the
@ A track number not on the disc is being | @ Use only track numbers on the disc.
memory.
used.
@ Insert all plugs firmly in jacks.
® Set switch to proper position.
Skipping.
Specifications
Ta
ae
NE
ae
OT)
Compact Disc Player
Model DX-6800
DX-3800
Signal readout system:
Optical non-contact
Optical non-contact
Reading rotation:
About 500-200 r.p.m. (constant linear velocity)
About 500-200 r.p.m. (constant linear velocity)
Linear velocity:
1.2-1.4 m/s
1.2-1.4 m/s
Error correction system:
Cross interleave Reed Solomon code
Cross interleave Reed Solomon code
D/A converter:
1 BIT PWM
x 2
Accu Pulse Quarz System
1 BITPWM
x 2
Accu Pulse Quarz System
Sampling frequency:
352.8 kHz (eight-times oversampling)
352.8 kHz (eight-times oversampling)
Number of channels:
2 (stereo)
2 (stereo)
Frequency response:
2 Hz-20 kHz
2 Hz~20 kHz
Total harmonic distortion:
0.0025% (at 1 kHz)
0.0025% (at 1 kHz)
Dynamic range:
100 dB
100 dB
Signal to noise ratio:
110 dB
110 dB
Channel separation:
100 dB (at 1 kHz)
100 dB (at 1 kHz)
Wow
and Flutter:
Below threshold of measurability
Below threshold of measurability
Output level:
2 volts r.m.s.
2 volts r.m.s.
Power consumption:
25 watts
25 watts
Power supply rating:
U.K. and Australian models: AC 240V, 50Hz
U.K. and Australian models: AC 240V, 50Hz
European model: AC 220V, 50Hz
European model: AC 220V, 50Hz
(Except U.K.)
(Except U.K.)
USA & Canadian models: AC 120V, 60Hz
USA & Canadian models: AC 120V, 6OHz
Worldwide model: AC 120V and 220V
Worldwide model: AC 120V and 220V
switchable 50/60Hz
switchable 50/60Hz
Dimensions (W x H x D):
435
x 132
x 358mm
435
x 132
x 358mm
17-1/8"
x 5-3/8" x 14-1/8"
17-1/8"
x 5-3/8" x 14-1/8"
Weight:
8.8 kg, 19.4 Ibs.
8.1 kg, 17.8 Ibs.
Output signal cord
Optical fiber cable
Remote control transmitter RC-177C
UM-3/R6/AA
FRI
remote contro! cable
Supplied accessories:
Output signal cord
Optical fiber cable
Remote control transmitter RC-176C
UM-3/R6/AA
FRI
remote control cable
Specifications and external appearance are subject to change without notice because of product improvements.
Advertisement
Table of Contents
