Regular Inspection And Maintenance Work - Hally-Gally Piccolo Assembly Instructions Manual

Regular inspection and maintenance work

Inspection frequency
Maintenance intervals are based on average use. Please note that more fre-quent inspections and/or
maintenance are required if the play equipment is subject to intensive use.
Factors that affect frequency include vandalism, location (e.g. coastal proximi-ty), air pollution and
the age of the equipment.
Monthly maintenance
•
Check the ground surface in the area with fall protection for hard objects and loose foundations.
•
Check the surface of wooden parts for damage caused by the weather or external influences and
mould. Repair or replace if necessary. (Just for trampolines with wood)
•
Oberflächengüte auf Beschädigung prüfen und ggf. auswechseln.
•
Maintenance of fall protection surfaces
•
Maintenance of the jumping mat
•
Maintenance of the springs
Quarterly maintenance
•
Detailed inspection of the operation and stability of the equipment paying particular attention to
any wear and tear.
•
Repaint and retreat surfaces.
•
Maintenance of fall protection surfaces.
•
Check the height of the fall and top up with loose filler if necessary. If the posts are labelled, top
up as far as the mark.
Half yearly maintenance
•
Ascertaining that the equipment, foundations and surfaces are safe for operation.
•
In particular, the equipment should be checked for decay and corrosion. It may be neces-
sary to dig out or excavate certain components in order to do so. Zinc paint should be
applied to corroded areas and scratches.
•
Pollution under the jumping mat has to be removed.
Spare parts
All spare parts must conform to the manufacturer's specifications.
Identifying spare parts
All spare parts are listed. The parts list follows the installation requirements.
SPOGG Sport-Güter GmbH • Schulstr. 27 • 35614 Aßlar/Berghausen
• www.hally-gally-spielplatzgeraete.de
spogg@hally-gally-spielplatzgeraete.de
V