Yamaha RX-V2700 Owner's Manual page 43

2
Press k / n repeatedly and then h to select
"Auto Setup".
PRESET/CH
ENTER
A/B/C/D/E
3
Press k to select "Information".
Information
Setup Menu
Start
4
Press h and then n repeatedly to select the
desired check items.
PRESET/CH
ENTER
A/B/C/D/E
Wiring
Distance
Size
PRESET/CH
ENTER
A/B/C/D/E
Wiring
Distance
Size
PRESET/CH
ENTER
A/B/C/D/E
Left Right
Front NRM NRM
Center NRM
Sur. NRM NRM
S.Back NRM NRM
NRM NRM
SubWfr NRM
Reload:ENTER
Wiring (Speaker wiring)
Displays the polarity of each connected speaker.
• "NRM" appears when the polarity of the connected
speaker is normal.
• "REV" appears when the polarity of the connected
speaker is reversed.
Note
"---" appears when no speaker is connected to the
corresponding speaker channel.
Distance (Speaker distance)
Displays the speaker distance from the listening
position. Press l / h to switch the unit to display the
value of the each speaker distance.
Note
"---" appears when no speaker is connected to the
corresponding speaker channel.
Size (Speaker size)
Displays the size of the connected speakers. The bass
cross over frequency ("Cross") appears at the bottom
of the menu area.
• "LRG" appears when the connected speaker has
the ability to reproduce the low-frequency signals
effectively.
• "SML" appears when the connected speaker does
not have the ability to reproduce the low-frequency
signals effectively.
Note
"---" appears when no speaker is connected to the
corresponding speaker channel.
Equalizing (Speaker equalizing)
Displays the result of the adjustment of the frequency
responses of each connected speaker.
Note
Gray line appears when no speaker is connected to the
corresponding speaker channel.
Level (speaker level)
Displays the speaker output level of the connected
speakers.
Note
Gray line appears when no speaker is connected to the
corresponding speaker channel.
AUTO SETUP
39
En