Table of Contents
Advertisement
Switch 4
Normal:
Down:
Switch 6
Normal:
Down:
Switch 7
Normal:
Down:
Switch 9
Normal:
Down:
Switch 14
Normal:
Down:
Switch 15
Normal:
Down:
Switch 16
Normal:
Down:
Tapes 4 and 5 are used as output/ input to assembly program passes 0, 1, and 2,
respectively.
Cards instead of tapes are used as output/ input to passes O, 1, and 2, respectively.
(Switch 4 down overrides switches 3 and 6.)
The binary program output is not written on tape 6.
The binary program output from pass 2 is written on tape 6.
Ignored
Go To Assembly 3 upon completion of General Assembly.
Card punch on line.
No card punch on line.
No packed symbolic listing.
Packed symbolic listing.
Ignored by the assembly program.
Symbolic program deck is written on tape 3 before any processing is done by the
assembly program.
Input to pass 0 is the symbolic program card deck.
Input to pass O is on tape 3. Tape 3, the comments tape, may be changed instead
of the symbolic card deck through an updating routine before making a second
assembly.
[IDruu&~~uc:J ~®------------
A-4
Advertisement
Table of Contents
