Zebra DS3608 - Ultra Rugged Digital Scanner Quick Start Manual

SCANNER FEATURES

1. Scan Window
2. Scan Trigger
3. LED
4. Beeper

ACCESSORIES

CABLE ATTACHMENT

1. Insert cable fully so that the connector is flush with the scanner surface.
   
2. Loosen metal lock plate screws using a PH1 driver.
   
3. Slide lock plate to fully locked position.
   
4. Tighten screw using a PH1 driver (torque: 5 in-lb).
   

SET DEFAULTS / ENTER KEY BAR CODES

RETURN TO FACTORY DEFAULTS

ADD AN ENTER KEY (Carriage Return/Line Feed)
To add an Enter key after scanned data, scan the bar code below.

ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED)

TAB KEY BAR CODE

ADD A TAB KEY
To add a Tab key after scanned data, scan the bar code below.

ADD A TAB KEY

USB CAPS LOCK OVERRIDE BAR CODE

USB - OVERRIDE CAPS LOCK KEY (ENABLE)

*USB - DO NOT OVERRIDE CAPS LOCK KEY (DISABLE)

STEP 1 - CONNECT HOST INTERFACE

USB

NOTE: Cables may vary depending on configuration

RS-232

Keyboard Wedge

IBM 46XX

STEP 2 - SET UP INTERFACE ( Scan Host Bar Codes )

USB

Scan ONE of the bar codes below
The interface cable automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan another host bar code below.

*USB KEYBOARD (HID)

USB CDC Host

IBM TABLE TOP USB

SNAPI WITHOUT IMAGING

SNAPI WITH IMAGING

IBM HAND-HELD USB

USB OPOS HAND- HELD

SIMPLE COM PORT EMULATION

SSI OVER USB CDC

RS-232

Scan ONE of the bar codes below

The interface cable automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan another host bar code below.

*STANDARD RS-232

ICL RS-232

NIXDORF RS-232 MODE A

NIXDORF RS-232 MODE B

FUJITSU RS-232

OPOS/JPOS

Keyboard Wedge

Scan a bar code below
The Auto-Host Detect Cable feature automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, scan the IBM PC/AT and IBM PC COMPATIBLE bar code below.

*IBM AT NOTEBOOK

IBM PC/AT and IBM PC COMPATIBLE

IBM 46XX

Scan ONE of the bar codes below
The Auto-Host Detect Cable feature automatically detects the host interface type, but there is no default setting. Scan one of the bar codes below to select the appropriate port.

NON-IBM SCANNER EMULATION (PORT 5B)

TABLE-TOP SCANNER EMULATION (PORT 17)

HAND-HELD SCANNER EMULATION (PORT 9B)

SCANNING

DS3608 - HP/HD Aiming

Cover the entire bar code with the aiming pattern to ensure it is within the field of view.

DS3608 - SR Aiming

For best results, aim the aiming dot at the center of the bar code.

DS3608 - ER Aiming

Cover the entire bar code with the aiming pattern to ensure it is within the field of view.

DS3608 - DP Aiming

For best results, aim the aiming dot at the center of the bar code.

RECOMMENDED USAGE GUIDE - OPTIMUM BODY POSTURE

BEEPER INDICATIONS

LED INDICATIONS

TROUBLESHOOTING

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Zebra DS3608 - Ultra Rugged Digital Scanner Quick Start Manual