Table of Contents
Advertisement
Displaying
the Elapsed
and
Remaining
Playing Time
Using the DISPLAY button, you can dispiay the total time the CD (or current
track) has been playing, and the amount of time that remains. This is useful
in situations such as recording, when you need to know how long the track
or CD has been piaying, or the amount of time that remains on the track or CD.
Press the DISPLAY button to show the time you want.
There are.four display times:
EACH
The total elapsed playing time since the beginning of play-
back of the current track
EACH REMAIN
The time remaining until the end of the current track
TOTAL
The total elapsed playing time since the beginning of play-
back of the CD
TOTAL REMAIN
The time remaining until the end of the CD
The display changes each time you press the DISPLAY button.
For Example:
a es ee
Pe
ee a i
SBOUOO
Ota
oaw
Display mode:
TOTAL REMAIN
Current track:
6th
Total remaining time:
37 minutes
48 seconds
Programming Your Own Playback
Sequence
You can program the CD Player to play back the tracks of a CD in any order.
1. Press the STOP/CLEAR
button on the CD Player.
This puts the CD Player in STOP mode and clears existing programs from
the memory.
2. Press the
PROGRAM button.
PROGRAM
C
3. Press the CD 10KEY button on the Remote Controller.
4. Enter the track numbers with the numeric keys in the order you want
them played back.
®
You can program up to 32 tracks.
If the total time of all the programmed tracks is 100 minutes or more,
the display will show ''— —:——'" (since the highest time the display
can show is ''99:59'').
5. Press the PLAY/PAUSE button on the CD Player, or the CD CONTROL
D> button on the Remote Controller.
Playback begins with the first track in the program.
6. To add a track to the program during playback, enter the track num-
ber with the numeric keys on the Remote Controller.
The new track is added to the end of the program.
| DX-MX70Bk
Checking the Program
You can check the programmed sequence of playback to determine which
tracks will be played in which order.
Note: The program contents cannot be displayed during playback. Press the
STOP/CLEAR button if the CD Player is in play mode.
1. Press the SEARCH button once.
.
[=J
C=)
The first track in the program is displayed, along with its sequence number.
For example:
This
display
shows
that the 6th track will
be played first.
2. Press the SEARCH
button repeatedly.
The rest of the tracks in the program are displayed, along with their se-
quence numbers.
Listening to Programmed Tracks Repeatedly
1. Press the REPEAT button to listen to the programmed sequence of play-
back repeatedly
I;
2. Then press the PLAY/PAUSE button.
Updating the Program
You can add and delete tracks from the program.
Adding Tracks to the Program
1. Press the CD 10KEY button on the Remote Controller.
2. Enter the track numbers with the numeric keys in the order yous want
them played back.
The track numbers you enter are added to the end of the program.
Deleting Tracks from the Program
Note:
The program contents cannot be deleted during playback. Press the
STOP/CLEAR
button if the CD Player is in play mode.
1. Press the SEARCH buttons to select the track to be deleted from the
program.
For example:
a,
Slat
ain
This display
shows
Pie
§™
COS
that the 11th track is
igi
er
a
selected
tO
be
deleted.
2. Press the CANCEL button on the Reniote Controller.
CAC
co
@
The track being displayed will be deleted.
Advertisement
Table of Contents
