Connecting A Dvd Player - Toshiba 34HF83 Owner's Manual

Connecting a DVD player ([with component
video) and a VCR
This connection allows you to watch DVD, VCR, and TV programs,
and record TV programs.
Your TV has ColorStream ® (component video) inputs. Connecting
your TV to a DVD player with component video inputs (such as a
Toshiba DVD player with ColorStream ®) can greatly enhance picture
quality and realism.
- To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
- To record a TV program while watching a DVD, tune the VCR to
the channel to record, and select ColorStream HD-1 on the TV (see
"Selecting the antenna input" on page 21).
You will need:
• two coaxial cables
• one set of standard A/V cables
• one pair of audio cables
• one set of component video cables
Stereo VCR
From Antenna
Note:
For the highest possiblepicture quality,use
component video cables Cora DVI D single
link cable) between the TVand DVD playeL
Youcan connect the component video cables
from the DVD player to either CelorStream
jaek on the TV CHD 1 or HD 25
TheColorStream HD 1 and HD 2jacks can
be usedwith ProgressiveC480p,720p) and
Interlace C4801j 10800 scan systems
ff your DVD player doesnot have component
video inputs, use the S video connections
Cplusthe standard audio connections) instead
of the CelerStream connections; however, do
not connect both S tfideo and standard video
cables between the TVand DVD player at the
same time Seepage 2
The unauthodzed recording, use,
distribution, or revision of television
programs,videotapes, DVDs, and other
materialsis prohibited under the
Copyright Lawsof the United States and
other countries, and may subject you to
civil and cdminal liability.
TV
10
DVD Player with component video