Selecting The Display Format (For 480P Signals Only) - Toshiba 34HF83 Owner's Manual

Selecting the color temperature
You can change tile quality of the picture by selecting from three
preset color temperatures: cool, medium, and warm.
To select tile color temperature:
1. Press MENU, and then press • or• until the PICTURE menu
appears.
2. Press • or • to highlight COLOR TEMPERATURE.
3. Press • or • to highlight the mode you prefer.
@_ANTENNA
MODE PREFERENCE
FLESH TONE ON
Selecting the display format (for 480p signals only)
This feature converts a 480p input signal to 540p or 1080i.
To select the display format:
1. Press MENU, and then press • or• until the PICTURE menu
appears.
2. Press • or • to highlight DISPLAY FORMAT.
3. Press • or• to select 540p or 1080i.
@@@@@@
@_ANTENNA
_E MOVIE
FLESH TONE OFF
CabEeC_ea_ DNR AUTO
COLOR
Note:
• TheDisp/y Formatfeature is availableonly
for 480P input. 10801is alwaysoutput
when a signal other than 480p is input:
• ifyou notice flicker in a 4801)image, try
setting the DisplayFormat to 540p
Resetting your picture
adjustments
The RESET function adjusts the picture qualities you adjusted to tile
following factory settings:
Contrast ................ max (100)
Brightness ............ center (50)
Color ................... center (50)
Tint ....................... center (0)
Sharpness ............. center (50)
Color temperature ........... cool
a
CableClear DNR ........... uto
Mode ........................... sports
To reset your picture adjustments:
1. Press MENU, and then press • or • until the PICTURE menu
appears.
2. Press • or • to highlight RESET.
3. Press • or •. The menu displays "DONE".
p _CTUR E ANTENNA
MODE SPORTS
CONTRAST 100
BRIGHTNESS 5O
_?_oR 0o