Adding Variations To The Sound - Reverb - Yamaha YDP-123 Owner's Manual

Sostenuto (Center) Pedal
If you play a note or chord on the keyboard and
press the sostenuto pedal while the note(s) are
held, those notes will sustain as long as you hold
the pedal (as if the damper pedal had been pressed)
but all subsequently played notes will not be sus-
tained. This makes it possible to sustain a chord,
for example, while other notes are played "stac-
cato."
Soft (Left) Pedal
The soft pedal reduces the volume and slightly changes the timbre of notes played while
the pedal is pressed. The soft pedal will not affect notes that are already playing when it
is pressed.
Adding Variations to the Sound – Reverb
This control enables you to select various digital reverb effects that add extra depth and expression
to the sound to create a realistic acoustic ambience.
Procedure
When you select a reverb, the reverb is automatically turned on.
While holding down the
type.
VOICE
Key Reverb Type
C2 Room
C 2 Hall1
D2 Hall2
D 2 Stage
E2 Off
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by pressing one of the C3–G 4 keys while
holding down the
VOICE
The lowest key
18 Selecting & Playing Voices
YDP-123
[VOICE] button, press one of the C2–E2 keys to select a reverb
The lowest key
This setting adds a continuous reverb effect to the sound, similar to
the acoustic reverberation you would hear in a room.
For a "bigger" reverb sound, use the HALL 1 setting. This effect sim-
ulates the natural reverberation of a small-size concert hall.
For a truly spacious reverb sound, use the HALL 2 setting. This effect
simulates the natural reverberation of a large concert hall.
Simulates the reverb of a stage environment.
No effect is applied.
button. The depth range is from 0 through 20.
[VOICE]
The depth value increases as you press higher keys.
When you press the sostenuto
pedal here while holding the note,
the note will sustain as long as you
hold the pedal.
C 2 D 2
C2 D2 E2
Description
G 4: depth 20
C3: depth 0
TIP
The default reverb type (includ-
ing OFF) and depth settings are
different for each voice.
TIP
depth 0: no effect
depth 20: maximum reverb
depth