Care, Cleaning & Storage - Breville LAP508 Instruction Manual

Care, Cleaning
& Storage
The air purifier and filter should be cleaned at
least once every month. Ensure the air purifier
is switched off and disconnected from the
power outlet and allow all parts to cool before
cleaning or storing.
• Use a clean, dry cloth to clean all external
surfaces of the air purifier.
NOTE
More frequent cleaning may be required
depending on environmental conditions.
BREVILLE RECOMMENDS
• Always ensure the air purifier is turned
off, switched off at the power outlet and
unplugged and allow the unit to cool
before performing any cleaning or filter
replacement.
8
DO NOT stick any foreign objects or your
fingers inside the air inlet/outlet of this unit.
8
DO NOT use gasoline, benzine, thinner,
harsh cleaners, etc. on and/or in the unit
while cleaning as they will damage the unit.
8
NEVER use alcohol or other solvents
on this unit.
12
CLEANING THE SENSOR
• It is important to keep the air quality sensor
clean for best performance.
• The air quality sensor is situated behind
a grill at the rear of the unit.
• Gently vacuum the air quality sensor grill
using a small hand brush tool. Cleaning
should occur regularly, at least once a month.
• For more thorough cleaning, remove the
cover by using the raised tab on the edge
of the cover. Push inwards and outwards
simultaneously to open the cover, noting
that it will be tight.
• Gently vacuum the mesh filter and metal
shield of the air quality sensor using the
hand brush tool. Thorough cleaning should
occur at least once every six months.
• Replace the mesh filter and cover when
clean, ensuring it clicks into place.
WARNING
The air quality sensor is fragile and can be
damaged if excessive force is used during
cleaning. Please use extra care when cleaning.
FILTER CARE & CLEANING
WARNING
The filter is not washable. Do not immerse
any part of the air purifier in water as it will
cause damage.
• The Pre-filter should be cleaned at least once
every month using a vacuum cleaner. Gently
vacuum using a hand-tool attachment such
as a brush or upholstery tool. Clean more
often if required.
• Do not attempt to clean the carbon filter with
a vacuum as this can cause damage.
• Do not use any solutions, hard bristle
brushes or sharp objects to clean as this
can cause damage.
• Replace the filter as indicated using the
following instructions.