Table of Contents
Advertisement
MODE 3:
Auto draft button on - Auto catch button off.
When switched to Auto mode the crush will adjust ready for auto drafting. Use this mode to auto
weigh and auto draft to weights selected on the scales panel.
1.
Set the Draft Gate switch to Straight before
operation. NOTE - Auto drafting commands
will be overridden if gate switch is
straight.
2.
Press Power button. The entry gate will
automatically open, and the crush gate and
head bail will automatically close.
3.
Press Auto Draft button. Note, button will
light up.
• When an animal enters it will be detected by
a sensor mounted in the top of the crush.
This will start the process of closing the
Crush entry gate automatically.
• Once animals' weight has been recorded the
drafting gates will move automatically as per
selected weight setting in the scales once all
operator gates are closed.
• Once animal has cleared the draft gate
sensor the process will begin again.
Taurus Auto Catch Cattle Crush |
not
set to
Installation & Operators Manual 2023
2
1
4
3
12
Advertisement
Table of Contents
