Table of Contents
Advertisement
MODE 2:
Auto draft button off - Auto catch button on.
This mode allows for catching the animal at the head bail with the option of manual drafting.
1.
Set the Draft Gate switch to Straight
before operation.
2.
Press Power button.
3.
Set the Head Bail Open Gap. The head bail
will close to the preset distance selected
on the control dashboard once operation
has started.
4.
Press Auto Catch button. Note, button will
light up.
5.
Use the Entry Gate Open switch to let the
animal into the crush.
6.
Use the Entry Gate Close switch to close
the gate behind the animal.
7.
Once the animal places its head through
the yoke in the head bail it will
automatically close.
•
Use the Squeeze Close switch to side
squeeze the animal (if desired).
Use the Chin Lift Up switch to raise the
•
chin lift, (if desired).
•
Use the Draft Direction switch to select to
divert the animal to the desired direction.
8.
Once all operator gates are closed. Push
the Release button. This automatically
returns all functions to the start positions
and releases the animal.
The Entry Gate Open will automatically open to let the next animal into the crush.
•
Note: To have good cattle flow it is important to set the head bail opening gap correctly. See
troubleshooting section.
Taurus Auto Catch Cattle Crush |
Installation & Operators Manual 2023
2
3
1
8
4
5/6
11
Advertisement
Table of Contents
