Section 5: Set-Up Instructions; Items Required For Assembly - MTD Cub Cadet 950 Owner's Manual

SECTION 5: SET-UP INSTRUCTIONS
This guide covers two model series. Models 950 and 959 have fixed front wheels; models 960 and 969
have caster front wheels. All models are six speed, self propelled mowers. Much of this owner's manual
pertains to both models. However, there are some modehspecific Information too. Use only the
information appropriate for your mower model.
ITEMS REQUIRED FOR ASSEMBLY
• Pair of Pliers (Not necessary, but helpful)
• Motor Oil
• Fresh Gasoline
IMPORTANT:
This unit is shipped WITHOUT GASOLINE in the fuel tank or OIL in the engine. Be certain to
service engine with gasoline and oil as instructed in the separate engine manual before operating your mower.
NOTE:
Reference to right or left hand side of the mower is observed from the operating position.
SETTING UP YOUR LAWN MOWER
Follow steps 1 through 10 to set up your lawn mower.
Step 3. Raise complete handle assembly until It
clicks into place. Make sure not to kink
the control cables.
Step 4. Pinch lower handle against mounting
bracket with pliers.
Step 5. Move hairpin clip from outer to inner hole
on handle mounting bracket.
Inner Hole
'/ \
Hairpin Clip
Pinch Here
© '
© ^