Table of Contents
Advertisement
The model plate will look like Figure 2.
This is where mower model number will be.
xxx-x-xxx-x-xxx xxxxxxxxxxx
■ This is where mower serial number will be.
Copy the model number here:.
MTD PRODUCTS INC K
^
^
CLEVELAND, OHIO
44136
J
Copy the
Serial
number here: _
Figure 2
SECTION 4: CALLING CUSTOMER SUPPORT
If you have any question regarding assembly, controls, operation or maintenance of this mower, please call the
Yardman Customer Support Department at
1
-
800
-
800-7310
Before you call, make sure that you have both the model and serial numbers of your mower ready. By doing so,
you help the Customer Support Representative give you faster service. To find your mower's model and serial
numbers, see the preceding section.
SECTION 5: UNPACKING INSTRUCTIONS
REMOVE UNIT FROM CARTON
(See Figure 3.)
• Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.
• Remove loose parts if included with unit (i.e., owner's manual, etc.).
• Cut along dotted lines and lay carton down flat.
• Remove packing material.
• Roll or slide unit out of carton. Check carton thoroughly for loose parts.
Figure 3
6
Advertisement
Table of Contents
