Broadcast Reception; Switch The Power On; Select A Station - Kenwood T-1001L Instruction Manual

Broadcast reception
7 Switch the power ON.
POWER
ON/STAND 8Y
a
2 Select FM or AM (MW, LW).
BAND
3 Select the tuning mode.
4 Select a station.
To decrease
frequency fTuninc/Pry set,
bow UP
To increase
frequency
Turn gently to the left or right.
Gently rotate the control clockwise {or counterclockwise) to select a
station with higher (or lower) frequency.
Each press alternates the band.
FM Re
AM AM/FM indicators
For U.K. and Europe
FM
@MW
LW
Each press alternates the mode.
NW: for U.K. and Europe
AUTO lit (Auto tuning)
AUTO not lit (Manual tuning)
e@ Normally, use the AUTO (Auto tuning) mode.
Use the manual tuning mode in case the reception s noisy due to
weak waves. (In the manual mode, stereo broadcastsare received in
monaural.)
TUNED indicator lights when
a station is received.
Frequency disp I ay
AUTO TUNED STEREO
2 a E xcept for U.K.
Pa a nd Europe
Auto tuning: Receives the next station automatically,
Manual tuning: If you turn and hold the TUNING/PTY S L. knob to the
left or right, the frequencies change cm tinously.