Page 1
User's Manual 40°C IPXO 104°F 0°C 2000 32°F CAUTION: Federal (USA) law restricts this device to sale by or on the order of a physician. Manufactured for: Dynarex Corporation 10 Glenshaw Street Orangeburg, NY 10962 USA • www.dynarex.com Made in Taiwan...
SYMBOL DESCRIPTIONS Not made with natural rubber latex Does not contain Phthalates (DEHP) Keep dry Keep away from sunlight Note: This symbol can also mean “Keep away from heat,” as referenced in ISO 7000:1989. 40°C 104°F Temperature limit 0°C 32°F Humidity limitation Maximum altitude 2000...
WARNINGS/CAUTIONS READ ALL INSTRUCTIONS BEFORE 3. Never operate this product if: USING. Use this product only for its intended a. It has a damaged power cord or plug use as described in this User’s Manual. b. It is not working properly c.
OPERATION Charging LED "ON" Switch Power Low Battery AC Adapter AC Adapter LED AC POWER SOURCE POWER INDICATOR LIGHTS INSTRUCTIONS POWER INDICATOR (LEFT LED) Green: When external power is supplied IMPORTANT: Before connecting the to the unit from an AC power source, the unit to the AC adapter, make sure that power light will be illuminated green.
BATTERY BATTERY OPERATION 5. Push the power switch to the “OFF” position (“O”) to shut off the suction motor. • To ensure proper operation from internal 6. After the motor stops completely, battery, fully charge the battery for 1-1.5 empty the canister or replace it hours (depending on the depth of discharge) with a new canister (See page 4 for as explained in the Battery Charging section.
BATTERY (continued) TESTING THE BATTERY 2. To ensure an uninterrupted power supply to Suction Unit, DO NOT QUALITY connect the AC adapter to an outlet that is controlled by a switch. If poor battery quality is suspected, charge the battery for at least 24 hours, 3.
TROUBLESHOOTING PROBLEM ACTION Unit does not turn on. (Green external 1. Check power sources and connections. power indicator should be illuminated 2. Ensure wall outlet has power. when power is applied.) 3. Check to determine if battery is fully charged. Suction Unit is on, but no vacuum pressure.
The Warranty shall not apply under the following conditions: If you have a question about your Dynarex device or this warranty, please contact • Problems arising from normal wear an authorized Dynarex dealer.
Need help?
Do you have a question about the Resp-O2 and is the answer not in the manual?
Questions and answers