Charging The Battery - Silvercrest 377187 2110 Operating Instructions Manual

CAUTION! PROPERTY DAMAGE!
The batteries in this appliance cannot be
►
replaced.
Remove the cutting unit from the handset
►
for cleaning under running water.

Charging the battery

The battery should be charged for at least 60 minutes before first use.
NOTE
► Ensure that the appliance is switched off before charging the
battery.
1) Plug the connector
2) Plug the mains adapter
with the appliance specifications. While the battery is charging,
the red charge indicator light
♦ When the battery is fully charged, the blue control lamp
lights up. Disconnect the product from the mains supply.
♦ Once the battery is fully charged, you can use the appliance for
around 60 minutes without connecting it to the power supply.
♦ If the red indicator light
too low. Recharge the battery in that case.
SRR 3.7 C3
w
into the mains connection
q
into a mains socket that complies
8
8
flashes, the battery charge level is
0
on the shaver.
flashes.
GB │ MT
7
│
91 ■