Boost Function - Haier HP200M1-U1 Operation Manual

Heat pump water heater controller
Hide thumbs Also See for HP200M1-U1:
Table of Contents

Advertisement

VAC mode
04.
Note: This mode is designed to maintain a minimum water temperature to conserve energy during a
period of absence from the property. The unit automatically reheats the water in advance of the return
date set.
1. Turn on the appliance by pressing the
_
2. Press the MODE keys until the display shows the VAC icon.
_ _
3. The two-digit temperature display flashes "01." Press the
away on vacation. The selectable range is between 1–99 days.
_ _ _
4. Press
key to confirm. The temperature display status will return and the value from the previous mode will
SET
be used.
_ _ _ _
5. If the appliance is switched off or the mode is changed, VAC mode will be reset and the number of days
entered will be lost.
_ _ _ _ _
6. According to the vacation days entered by the user, heating will begin at 12:00 on the second to last day of the
vacation period. The first heating cycle will heat to 65℃ to ensure that the water sterilization requirements have
been reached. After the heating is completed, the appliance with switch to AUTO mode.

Boost function

05.
mode will take priority over other modes. This mode will run for a single heating cycle, then revert back
BOOST
to the previous mode set. In this mode, the heat pump and back-up electric element operate simultaneously to
reduce the heating time.
When operating, the
the appliance will operate in the mode used prior to
Lock screen
06.
1. With the appliance turned on, hold the
_
2. The controller will beep twice and the lock screen icon will appear, indicating the screen is locked.
_ _
3. To exit lock screen, hold the
times and the lock screen icon will disappear. The controller will now be adjustable.
key if in Standby, otherwise disregard this step.
icon will appear. After the set temperature has been reach, the icon will disappear and
TIMER
and
and
TIMER
BOOST
+
or
key to adjust the number of days you will be
function.
BOOST
BOOST
keys simultaneously for 6 seconds.
keys simultaneously for 6 seconds. The controller will beep 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp250m1-u1

Table of Contents