High-Hitch; High-Hitch With Automatic Trailer Coupling - Kubota M100GX-II Operator's Manual

86 3-POINT HITCH & DRAWBAR

HIGH-HITCH

To avoid personal injury or death:
A Never pull from the top link, the rear axle or any
point above the hitch. Doing so could cause the
tractor to tip over rearward causing personal
injury or death.
A The high-hitch load is referred to "IMPLEMENT
LIMITATIONS" section.
BHigh-Hitch
The high-hitch can be adjusted depending on an
attachment to pull behind. The high-hitch may get in the
way when connecting the universal joint. In such case,
either set the high-hitch to its uppermost position or
remove it.
(1) Automatic Clevis
(2) Manual Clevis
(3) K80 Ball with Grab Handle
(4) K80 Ball without Grab Handle
C Adjusting the high-hitch level
1. Turn the handle upward to unlock them. Move the
high-hitch bracket up and down to change the hitch
height.
2. Align the lock pin with the lock hole. Return the handle
horizontal to lock them.
(1) High-hitch
(2) Handle
(3) Lock pin
(4) Lock hole
BHigh-hitch with Automatic Trailer
Coupling
C COUPLING UP
1. Lift the operating handle upwards as far as it will go
until it blocks.
The coupling pin is raised and the trigger lever is
visible.
(1) Operating handle
(2) Coupling pin
(3) Trigger lever
(4) Security pin
(A) "UN-LOCK"
(B) "LOCK"