1
1.4 NOTES ON ASSEMBLING
Note : The right and left positions for the attachment positioning of digital amplifier block are gradual, however, adjust the
front and back positions correctly. For the positioning procedure, refer to "7. DISASSEMBLY".
A
When assembling the digital amplifier block, please note the following points of screws to prevent from short-circuit.
The following 7 points of screws must always be used AMZ30P060FTC
B
IR BUFFER ASSY
C
Points to be watched for swarf
Accessory of Panel Base
D
E
F
If a screw at any of these points needs to be removed for service,
be sure to check that the swarf is not on the screw before refastening.
6
1
2
Rear Panel
SC-65
2
3
IR Cover
BUFFER GND ASSY
D-AMP_S ASSY
• Front View
3
4
4