Installation Instructions; Unpack Dishwasher - Midea MDF24P1AST Installation Instructions Manual

Grounding Instructions:
•
The dishwasher must be connected to a grounded metal, permanent
wiring system, or an equipment grounding conductor must be run with
the circuit conductors and be connected to the equipment grounding
terminal or lead on the dishwasher.
Power Cord Connections:
•
Use a power cord with connections that comply with the National
Electrical Code, Section 422 and/or local codes and ordinances.
•
Recommended cord length is 54" min. and 64" max.
•
A power cord kit #BK500 is available for purchase from an authorized
parts dealer.
Direct Wire Connections:
•
Use flexible, armored or nonmetallic sheathed, copper wire with
grounding wire that meets the wiring requirements for your local
codes and ordinances.

INSTALLATION INSTRUCTIONS

IMPORTANT:
•
This appliance should be installed only by a qualified Installer, plumber
or technician and in accordance with the manufacturer's installation
instructions, electrical and plumbing national and local codes and
ordinances.
•
The dishwasher must be installed to allow for future removal from the
enclosure if service is required.
•
Each dishwasher is tested at the factory and may contain some
residual water in the tub as a result of the test.

UNPACK DISHWASHER

IMPORTANT: If you received a damaged dishwasher, you should
immediately contact Midea Customer Service.
WARNING
Suffocation Hazard
•
To avoid danger of suffocation, keep plastic bag and
other packing material away from babies and children.
Do not use this bag in cribs, carriages and playpens.
The plastic bag could block nose and mouth and
prevent breathing. This bag is not a toy.
•
Failure to follow these instructions can result in death or
brain damage.
11