Kenwood KR-A5040 Instruction Manual page 18

System control operation
Connection
tions as shown below.
tae ie A IDES F
@ For a cassette deck to be real of
subject to system control cD © GO|G|/O«
operation, it must be con- 7 @ Cres ©
nected to the TAPE 7 re as
jacks. H tb
Notes on using audio timer
To record @ broadcast program us-
Turntable ing an audio timer, be sure to set
5 the input selector to TUNER, then
turn off the power.
To AC outlet
ng 415 190 4 - ome 170 tat,
System control
cord
Cassette deck
S o ef <I : =
ars LF :
CDI player
Hi Connection of the audio cords and system con-
trol cord
Make sure that the audio cords are connected correcily right
and left as in the figure.
If the system control cord and audio cords are not connected
properly, the automatic system governing remote control and
system functions will not operate.
{For connections of the audio cords, refer to the '"System con-
nections'' diagram.)
a
18 KR-A5040 {En}
By connecting this unit to KENWOOD cassette deck, CD play-
er, and turntable models equipped with system cantral jacks,
the following integrated operation features become available.
Operation
1. Automatic play operation
When starting play with the turntable, cassette deck, or CD
player connected to ihe receiver, press the desired input
selector keys on the receiver. The turntable, cassette deck,
or CD player will automatically enter play mode.
In the same way, pressing the Play key of the turntable, cas-
sette deck, or CD player will automatically switch the input
selector on the receiver to the component on which the Play
key is pressed.
2. Synchro recording
To record the sound from the CD player or turntable onto
a tape with the cassette deck, press the CD or PHONO of
the input selector switch and load a CD or record. Sei the
cassette deck to rec pause mode, then press the PLAY
(START) key of the CD player or turntable. The cassette deck
will start recording automatically, synchronized with the CD
player or turntable starting play.
3. Remote control
The remote control unit provided with this unit, to which
a KENWOOD system turntable, cassette deck, or CD play-
er is connected, is equipped with related control keys. The
related components can be controlled using these keys.
Note: —
During recording with a cassette deck, the input selector on the
receiver is fixed at the source from which the recording is made,
by the system control circuit. At this time pressing any of the in-
put selector keys has no effect.