Kenwood KR-A5040 Instruction Manual page 13

POWER key CD DIRECT indicator
KENWOOD
AM-FM STEREO AECEIVER KR-aB040
SS wae aii wee ee
2 VORA AEE CAFE DT
non Torr
SPEAKERS switch
@ To record an input source
1. Press the POWER key to ON.
2. Select the source to be recorded with the Input selector
keys.
3. Play the source.
4. Set tape deck 1 and/or tape deck 2 to record made.
Note: ——---- - =
When a tape deck is connected to this unit with a System Control
cord, all of the input selector keys are disabled during recording.
and do not function until recording Is finished. This will prevent the
recording from being interrupted.
@ Operations using CD DIRECT key
To enjoy more pure and high-quality sound of Com-
pact Discs:
1. Press the CD key.
2. Press the CD DIRECT key.
3. Play the CD player.
@ The CD DIRECT key is given priority over the setting of
the input selector keys.
® To cancel the CD DIRECT input, press the CD DIRECT
key again or press one of the Input selector keys (ex-
cept CD and TAPE 2 keys}. The input will be switched
to the source indicated on the display.
Steamed Lacie
a =4
{Cm | me Pane [= [|
J
t
——-—— pa |
input selector keys
VOLUME CONTROL
es
CD DIRECT key
M@ Tape dubbing
Tape recordings may be duplicated (dubbed) easily using two
tape decks connected to the TAPE 1 and 2 jacks.
For example:
(TAPE 1 to 2):
1. Connect two tape decks to the TAPE 1 and TAPE 2 jacks.
2. Press the TAPE 1 key.
3. Play back the recorded tape and adjust the recording lev-
els before starting tape dubbing.
(TAPE 2 to 1):
1. Prass the TAPE 2 key.
2. Press a key other than TAPE 1 of the Input selector keys
such as CD.
3. Play back the recorded tape and adjust the recording lev-
els before starting tape dubbing.
4. Do not press the TAPE 1 key during recording with tape
deck 7.
Note:
Adjust recording levels on the deck that is making the copy using
that deck's operating controls.
KR-A5040 (En) 13