Advertisement
12.
Control settings:
Elevator: Low Rate 8-10 deg. 15-20% expo
Aileron: Low Rate 15-20 deg. 20-30% expo
Rudder: Low Rate
Flaps: 40 degrees full deflection with 5% down elevator mix at full deflection
NOTE: Check rudder and elevator for interference at full deflection.
Covering colors:
Oracover colors Ultracote colors
RED/WHITE Scheme
Ferrari Red #23 True Red-#HANU866
White #10
Silver # 91
Black #71
BLUE/WHITE Scheme
#52 dark blue
White #10
Cub Yellow #30
Before flight, use a covering iron to go over all seams on the covering. Double check the
direction the controls move in and verify your prop is installed correctly. Check your power
system on the ground in a safe manner. Enjoy your Bushmaster!
3D Rate 45 deg. 60-70% expo
High Rate 38-40 deg. 60-70% expo (For best roll rate, mix flaps to ailerons)
20 deg 40-45% expo
High Rate 45 deg. 70-80% expo
White-# HANU870
Silver-#HANU881
Black-#HANU874
Midnight blue
White-# HANU870
Cub Yellow-#HANU884
#HANU 885
Advertisement
