Advertisement
11.
Locate the lower strut mount inside the fuselage. This is where the struts are mounted for flight
with a screw.
The balance point for the maiden flight of the Bushmaster is on the wing spar tube, you can easily
support the plane by the tube and it should hang level. Move your LiPo battery to adjust CG. Be
sure to use adhesive velcro on your battery and battery tray AND a velcro strap around the battery
and tray, to retain the battery in place.
For convenience in field setup, we recommend the use of MPX dtwo-wire connectors (available at
ExtremeFlightRC.com) to connect the aileron and flap servo wires in the fuselage.
Advertisement
