Touch Tone; Feet - Yamaha Electone EL-27 Owner's Manual

Press the PAGE button to return to the Page 1.
Voice Condition - Page 1

Touch Tone

The Touch Tone function gives you expressive control over the volume and timbre of a voice.
TOUCH (Touch Tone)
The depth of Touch Tone is switchable alternately to 1 (Shallow) or 4 (Deep)
by pressing the DATA CONTROL button found in the bottom left to the LCD
display. 4 is the factory setting.
The Touch Tone cannot be applied to the pedal voices.
Press the PAGE buttons to select the Page 2.
Voice Condition - Page 2

Feet

FEET
Determines the octave setting of the voice. PRE. (Preset) is the original
(factory) setting; 4' is the highest and 16' is the lowest.
Settings: PRE., 4', 8', 16'
Selects next setting.
Selects previous setting.
26
The Touch Tone function
provides initial/after touch
response over the voices, controlling
volume and timbre according to the
velocity at/after which you strike the
keys.
PAGE
The set values 1 and 4 are
the same as the ones found
in the upper models, respectively.
The Touch Tone does not
function to Organ Voice. The
after touch does not function to the
percussive voices (Piano, etc.).
By using different Feet
settings in the Lower and
Upper keyboards, you can duplicate
the wide octave range of many
instruments. For example, with both
the Lower and Upper keyboards set to
the Piano voice and Feet set to
appropriate values, you can play the
voice nearly over the full range of a
grand piano.
PAGE