Yamaha Electone EL-27 Owner's Manual page 64

5.
Press the RECORD button to set up
recording of the next part.
In this case, the song (number) contains the performance
data of the Lower and Pedal in addition to the registration
and setup data. The small bars ("––") appear at the left
part of LED display and flash along with the song number,
warning you that the selected song number already
contains recorded data.
6.
Press the RECORD button again to
record another part. (Upper part.)
The RECORD lamp lights up and the PLAY and CUSTOM
PLAY lamps begin blinking, indicating that the Music Disk
Recorder is ready to record.
7.
Press the RECORD buttons for each part
in the upper left row to turn off the parts
you have already recorded.
In this case, press RECORD/LOWER, RECORD/PEDAL
and RECORD/CONTROL to turn off.
8.
Press the CUSTOM PLAY button to start
recording of the new part or parts. (Upper
part.)
Playback of the previously recorded parts starts
immediately.
The CUSTOM PLAY button is used here to record only the
parts that have been selected for recording, and play back
only those parts that have been selected for playback.
Since registration data has already been recorded with the
first parts of the song, recording begins immediately.
While you listen to the parts being played back, start
playing the melody on the Upper keyboard.
When the end of the recorded performance is reached,
playback is automatically stopped and the STOP status is
resumed.
62
RECORD PLAY
UPPER LOWER PEDAL CONTROL UPPER LOWER PEDAL CONTROL
SONG FROM TO
REPEAT SONG COPY
--01
PAUSE STOP PLAY SONG SELECT
TEMPO
MUSIC DISK RECORDER
RECORD PLAY
UPPER LOWER PEDAL CONTROL UPPER LOWER PEDAL CONTROL
SONG FROM TO
REPEAT SONG COPY
01
PAUSE STOP PLAY SONG SELECT
TEMPO
MUSIC DISK RECORDER
RECORD PLAY
UPPER LOWER PEDAL UPPER LOWER PEDAL CONTROL
CONTROL
SONG FROM TO
REPEAT
SONG COPY
01
PAUSE STOP PLAY SONG SELECT
TEMPO
MUSIC DISK RECORDER
RECORD PLAY
UPPER LOWER PEDAL CONTROL UPPER LOWER PEDAL CONTROL
SONG FROM TO
REPEAT SONG COPY
610
PAUSE STOP PLAY SONG SELECT
TEMPO
MUSIC DISK RECORDER
The CUSTOM PLAY button is used to play
back the specified track(s).
The length of a subsequently recorded part
cannot exceed the length of the previously
recorded parts. If you want to change the song
length, first delete the existing song (see Song Delete
on page 71.) and record again.
SHIFT
SONG DEL.
RECORD CUSTOM PLAY
FORMAT
SHIFT
SONG DEL.
RECORD CUSTOM PLAY
FORMAT
SHIFT
SONG DEL.
RECORD CUSTOM PLAY
FORMAT
SHIFT
SONG DEL.
RECORD CUSTOM PLAY
FORMAT