Stop Button - Yamaha Electone EL-27 Owner's Manual

Yamaha el-27: user guide
Table of Contents

Advertisement

6.
After numbers appear on the LED
display of the M.D.R., begin playing.
Once the setup operation in step #5 is complete, a
number will appear on the LED display indicating that you
can begin recording your performance. The number also
indicates the amount of memory left on the disk.
If you make a mistake during recording:
1.
Press the PLAY button while the M.D.R. is still
running.
This stops the recording and returns you to the starting
point of the song.
The letters "rE" (retry) appear on the left side of the LED
display and the PLAY and CUSTOM PLAY LEDs start
flashing, indicating that you can re-record the song.
2.
Press PLAY again to begin re-recording the song.
Re-recording starts from the beginning of the song and
replaces the previously recorded performance with the
newly recorded performance.
7.
When you finish playing, press the

STOP button.

After the small bars flash to draw a square on the LED
display to indicate the processing for stop, both the
RECORD and PLAY lamps go out, and recording is
stopped.
8.
To hear your newly recorded
performance, press the PLAY button.
Playback will begin after a couple of seconds. For more
information on playback and other playback-related
functions, see page 65.
RECORD
UPPER
LOWER
PEDAL
CONTROL
UPPER
LOWER
SONG
FROM
TO
REPEAT
SONG COPY
622
PAUSE
STOP
PLAY
SONG SELECT
TEMPO
MUSIC DISK RECORDER
The short time it takes to set up for recording is
recorded as well, causing a short pause before
playback of the song.
RECORD
UPPER
LOWER
PEDAL
UPPER
LOWER
CONTROL
SONG
FROM
TO
REPEAT
SONG COPY
rE01
PAUSE
STOP
PLAY
SONG SELECT
TEMPO
MUSIC DISK RECORDER
RECORD
UPPER
LOWER
PEDAL
CONTROL
UPPER
LOWER
SONG
FROM
TO
REPEAT
SONG COPY
PAUSE
STOP
PLAY
SONG SELECT
TEMPO
MUSIC DISK RECORDER
When the available memory reaches "008" or
less, the numbers begin flashing to warn you.
If this happens, stop recording before the display
reaches "000."
Be sure to remove the floppy disk from the
disk drive after the STOP lamp lights up.
Never attempt to press the eject button or
turn the power off during recording, reading
and playing back. Doing so can damage
the disk and possibly the disk drive. Be sure to
remove the floppy disk from the disk drive before
turning off the power.
PLAY
PEDAL CONTROL
SHIFT
SONG DEL.
RECORD
CUSTOM PLAY
FORMAT
PLAY
PEDAL CONTROL
SHIFT
SONG DEL.
RECORD
CUSTOM PLAY
FORMAT
PLAY
PEDAL CONTROL
SHIFT
SONG DEL.
01
RECORD
CUSTOM PLAY
FORMAT
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents