Table of Contents
Advertisement
WARNING
!
Risk of burn injuries due to hot or cold com-
ponents and pipeline.
Regulator components and the pipeline may
become very hot or cold. Risk of burn inju-
ries.
− Allow components and pipelines to cool
down or warm up to the ambient tempera-
ture.
− Wear protective clothing and safety gloves.
10.1 Decommissioning
To decommission the regulator for service
and repair work or disassembly, proceed as
follows:
1. Close the shut-off valve on the upstream
side of the regulator.
2. Close the shut-off valve on the down-
stream side of the regulator.
3. Completely drain the pipelines and regu-
lator.
4. Depressurize the plant. Shut off or dis-
connect the control line, if installed.
5. If necessary, allow the pipeline and de-
vice to cool down or warm up to the am-
bient temperature.
6. Remove the regulator from the pipeline.
EB 2623-1 EN
Decommissioning and removal
10.2 Disposal
We are registered with the
German national register for
waste electric equipment (stiftung
ear) as a producer of electrical
and electronic equipment,
WEEE reg. no.: DE 62194439
Î Observe local, national and internation-
al refuse regulations.
Î Do not dispose of components, lubricants
and hazardous substances together with
your other household waste.
Note
We can provide you with a recycling
passport according to PAS 1049
on request. Simply e-mail us at
aftersalesservice@samsongroup.com giving
details of your company address.
Tip
On request, we can appoint a service pro-
vider to dismantle and recycle the product.
39
Advertisement
Table of Contents
