Wall Mounting - Advantech ICR-4161 Hardware Manual

1. Product Overview

1.8 Wall Mounting

The wall mounting clips are included as a standard accessory with the router.
The router can be affixed to a wall or another surface using the wall mounting clips. Two wall mounting
clips are pre-assembled to the router during production and need to be rotated as shown in Figure 8.
Each clip features two holes with a diameter of 5 millimeters for screw placement. For precise mounting
dimensions, refer to Figure
When attaching the wall mounting clips, tighten the screws with a maximum torque of 0.4 Nm.
ICR-4161 Hardware Manual
6 in Chapter 1.6.
Figure 8: Rotated Wall Mounting Clips
1.8 Wall Mounting
11