Table of Contents
Advertisement
Alarm function
Activating the alarm function in base mode
Additional Features
Alarm configuration
The alarm function may only be configured by an administrator or service personnel.
wiki.gigaset.com
The configuration of the alarm function is blocked by a service PIN for all other users.
The administrator can configure the following options on the handset:
Keypad locked
Response Time
Pre-Alarm
Alarmierung
Technical Warning
Sensors test
Reset to defaults
Service PIN
38
OK
Basic Mode Activ.
The administrator can configure whether the alarm key is also
locked when the key lock is active.
The administrator can configure the response time that the
handset allows as a margin before an automatic alarm is trig-
gered.
The administrator can configure pre-alarms that announce an
automatic alarm. In the event of an incorrect pre-alarm, the
handset user can cancel the automatic alarm.
The administrator can configure the type of signalling (melody /
vibration / silent alarm).
The administrator can configure how the handset behaves in the
event of a technical malfunction (low battery level, distance from
the base too great) and which signalling is used in the event of a
technical malfunction.
The administrator can adjust the sensors used to detect an alarm
situation.
The administrator can reset the configuration of the alarm func-
tion on the handset to the default settings.
The administrator can set the service pin that opens the menu
Alarm Configuration so that changes can be made to the config-
uration.
Availability and operation of the functions
may differ on your telephone.
Edit (
= activated)
Advertisement
Table of Contents
