Table of Contents
Advertisement
Registering the handset (depending on the base)
Register the handset to a base/router.
Registration must be initiated both on the base and on the handset. Both must be
carried out within 60 seconds.
On the base / router
Gigaset base:
Other base/router:
On the handset
Registration on a base:
Once registration is complete, the handset returns to idle status. The internal number of the
handset is shown on the display, e.g. INT 1.
A handset can be registered to up to four bases.
Settings
Register the handset:
Change of base:
De-registering a handset
(dependent on base):
Some Gigaset bases or third-party bases/routers may not be fully compatible with the
handset and not all functions will be displayed correctly. In this case, use the menu
option Basic Registration. This guarantees correct displays on the handset, but can
restrict some functions.
Press and hold the registration/paging key on the base
(approx. 3 seconds)
Start registration procedure
Documentation on your base/router
Please register handset is displayed
press the display key Register . . . a search is performed for a regis-
tered base
delivery for Gigaset bases: 0000)
OK
Registration
Register Handset
ready for registration
(default setting for Gigaset bases: 0000)
Select Base
(
= selected)
Best Base: The handset selects the base with the best reception
when it loses connection to the current base.
De-reg. Handset
necessary, select another handset
a system PIN
If the handset is still registered to other bases, it switches to the
base with the best reception (Best Base).
Availability and operation of the functions
may differ on your telephone.
Setting up the handset for use
if necessary, enter a system PIN (status on
OK
OK . . . a search is carried out for a base that is
enter the system PIN if required
OK
select base or Best Base
OK . . . the handset used is selected
OK . . . confirm registration with Yes
OK
Select
OK . . .
if necessary, enter
if
11
Advertisement
Table of Contents
