Radiant RX-11 Instructions

RX-11 Heated Towel Rail Thermostat Instructions

LCD symbols

Symbol
Event
The buttons are locked
Override Temporary override
NEXT To move to the next setting options
To increase the set value
To decrease the set value

Configuration Menu

To enter into the setting menu please follow the steps below:
Step 1, Turn the timer switch off by pressing
Step 2, Press , you will then see menu 01.
MENU
Step 3, Use the up and down arrows to adjust Menu 01
NEXT
Step 4, Press to move to the next Menu and once you have all the menu options set,
Setp 5, Press to accept and store.
DONE
Menu # Feature
01 Clock Format
02
Program Mode

Setting the clock and day of the week

This timer switch is fitted with a real time clock. It is essential that the clock time and day are set accurately if you require your programmed events to start
on time. To set follow the steps below:
Touch the time display and the time will start flashing. Use the up and down arrows to set the time.By holding the arrow down the time will change faster.
1
NEXT
2 Press to move to the Day setting and use the up and down arrows to get to the correct day.
DONE
3
Press to store and exit.
Symbol
Event
Power button, to turn on/off the timer switch
POWER
MENU
Menu button, to enter into menu settings
SCHEDULE
Program button, to program your thermostat
DONE
To confirm your settings
;
POWER
Explanation
You can select the clock to show in either 12 or 24 hour time
This allows you to program either 5 days at once, then the 2
days of the weekend separately, or a full 7 days at the same
time or 7 days separately, or countdown timer only
See overleaf for further setting up information
Page1
ver 2.0
Adjustment
（press up & down buttons to adjust）
24 (default), 12
01 = 5+2 day programmable (default)
02 = 7 day programmable