Radiant TS8100-DUAL-V Instructions

Radiant Floor Heating WA Pty Ltd Unit 1 / 18 Profit Pass, Wangara, WA 6065
Telephone: 08 6300 0404 Email: sales@floorheatingwa.com.au
TS8100-THTIM-DUAL-V Thermostat
TS8100-THTIM-DUAL-V Thermostat
TS8100-THTIM-DUAL-V Thermostat
TS8100 - DUAL - V THERMOSTAT INSTRUCTIONS
Timer Instructions
Timer Instructions
Timer Instructions
ver 1.1
ver 1.1
ver 1.1

LCD SYMBOLS

LCD symbols
LCD symbols
LCD symbols
Symbol Event
Symbol Event
Symbol
Event
The buttons are locked
The buttons are locked
The buttons are locked
Heating is turned on
Heating is turned on
Heating is turned on
Frost protection activated
Frost protection activated
Frost protection activated
Program number
Program number
Program number
Manual mode
Manual mode
Manual mode

Configuration Menu

CONFIGURATION MENU
Configuration Menu
Configuration Menu
To enter into the setting menu please follow the steps below:
To enter into the setting menu please follow the steps below:
To enter into the setting menu please follow the steps below:
Step 1, Turn the thermostat off by pressing
Step 1, Turn the thermostat off by pressing
Step 2, Press Step 1, Turn the thermostat off by pressing , you will then see menu 01.
MENU
Step 2, Press , you will then see menu 01.
MENU
Step 3, Use the up and down arrows to adjust menu 01. Step 2, Press , you will then see menu 01.
MENU
Step 3, Use the up and down arrows to adjust menu 01.
NEXT
Step 3, Use the up and down arrows to adjust menu 01. Step 4, Press to move to the next Menu,
NEXT
Step 4, Press to move to the next Menu,
NEXT
Step 4, Press
to move to the next Menu,
Setp 5, Press to accept and store once you have all menu options set.
DONE
Setp 5, Press to accept and store once you have all menu options set.
DONE
Setp 5, Press to accept and store once you have all menu options set.
DONE
Menu # Feature
Menu # Feature
Menu # Feature
Mode/Sensor selection(Zone 1 only)
01 Mode/Sensor selection(Zone 1 only)
01
Mode/Sensor selection(Zone 1 only)
01
Maximum Floor Temp
02
Maximum Floor Temp
02 ( AF mode only) (Zone 1 only)
( AF mode only) (Zone 1 only)
Maximum Floor Temp
02
( AF mode only) (Zone 1 only)
03 5+2 / 7 Day Mode
03 5+2 / 7 Day Mode
03 5+2 / 7 Day Mode
SETTING THE CLOCK + DAY OF THE WEEK
Setting the clock and day of the week
Setting the clock and day of the week
This thermostat is fitted with a real time clock. It is essential that the clock time and day are set accurately if you require your programmed events to start
Setting the clock and day of the week
This thermostat is fitted with a real time clock. It is essential that the clock time and day are set accurately if you require your programmed events to start
on time. To set follow the steps below:
This thermostat is fitted with a real time clock. It is essential that the clock time and day are set accurately if you require your programmed events to start
on time. To set follow the steps below:
on time. To set follow the steps below:
Touch the time display and the time will start flashing. Use the up and down arrows to set the time.By holding the arrow down the time will change faster.
1
Touch the time display and the time will start flashing. Use the up and down arrows to set the time.By holding the arrow down the time will change faster.
1
NEXT
Touch the time display and the time will start flashing. Use the up and down arrows to set the time.By holding the arrow down the time will change faster.
1
2 Press NEXT to move to the Day setting and use the up and down arrows to get to the correct day.
2 Press to move to the Day setting and use the up and down arrows to get to the correct day.
NEXT
DONE
2 Press to move to the Day setting and use the up and down arrows to get to the correct day.
3
Press to store and exit.
DONE
3
Press to store and exit.
DONE
3
Press to store and exit.
Symbol Event
Symbol Event
Symbol
Event
Automatic mode,
AUTO
Automatic mode,
AUTO executes the programmed schedules
executes the programmed schedules
Automatic mode,
AUTO
executes the programmed schedules
Override Temporary Temperature Override
Override Temporary temperature override
Override Temporary temperature override
Err The floor sensor is not being read by the thermostat
Err
The floor sensor is not being read by the thermostat
Err
The floor sensor is not being read by the thermostat
Economy temperature
Economy temperature
Economy temperature
Comfort temperature
Comfort temperature
Comfort temperature
;
POWER
;
POWER
;
POWER
Explanation
Explanation
Explanation
This thermostat is a combination model which allows you to
This thermostat is a combination model which allows you to
choose 3 different modes.
choose 3 different modes.
This thermostat is a combination model which allows you to
A mode=Air Sensing Only(Has built in sensor)
A mode=Air Sensing Only(Has built in sensor)
choose 3 different modes.
AF mode=Air & Floor sensing(Floor probe must be installed)
AF mode=Air & Floor sensing(Floor probe must be installed)
A mode=Air Sensing Only(Has built in sensor)
F mode=Floor Sensing(Floor probe must be installed)
F mode=Floor Sensing(Floor probe must be installed)
AF mode=Air & Floor sensing(Floor probe must be installed)
F mode=Floor Sensing(Floor probe must be installed)
This is to protect the floor surface.
This is to protect the floor surface.
For Wooden floors - When the manufacturer has set a
For Wooden floors - When the manufacturer has set a
This is to protect the floor surface.
temperature limit.
temperature limit.
For Wooden floors - When the manufacturer has set a
temperature limit.
This allows you to program either 5 days at once, then the 2
This allows you to program either 5 days at once, then the 2
days of the weekend separately, or a full 7 days at the same
days of the weekend separately, or a full 7 days at the same
This allows you to program either 5 days at once, then the 2
time or 7 days separately
time or 7 days separately
days of the weekend separately, or a full 7 days at the same
time or 7 days separately

Turning On/Off the Thermostat

TURNING ON/OFF THE THERMOSTAT
Turning On/Off the Thermostat
Turning On/Off the Thermostat
Press button to turn on/off the thermostat. When thermostat is turned
POWER
Press button to turn on/off the thermostat. When thermostat is turned
POWER
off，the LCD will display OFF. The outputs for all zones will be turned off.
Press button to turn on/off the thermostat. When thermostat is turned
POWER
off，the LCD will display OFF. The outputs for all zones will be turned off.
off，the LCD will display OFF. The outputs for all zones will be turned off.

Alternating the Zones

Alternating the Zones
ALTERNATING THE ZONES
Alternating the Zones
In order to alternate between the zones you should press
In order to alternate between the zones you should press
will display ZONE 1 or ZONE 2 at top left corner.
In order to alternate between the zones you should press
will display ZONE 1 or ZONE 2 at top left corner.
will display ZONE 1 or ZONE 2 at top left corner.
Adjustment
Adjustment
Adjustment
A, AF, F
A, AF, F
A, AF, F
20 °C~ 40 °C (40 °C by default)
20 °C~ 40 °C (40 °C by default)
20 °C~ 40 °C (40 °C by default)
01 = 5+2 day programmable
01 = 5+2 day programmable
02 = 7 day programmable
02 = 7 day programmable
01 = 5+2 day programmable
02 = 7 day programmable
See overleaf for further instructions >>>
FLOOR HEATING WA
, the LCD
ZONE
, the LCD
ZONE
, the LCD
ZONE
（press up & down buttons to adjust）
（press up & down buttons to adjust）
（press up & down buttons to adjust）