Accessories - OCEANAIRE OWC Series Engineering, Installation And Service Manual

ACCESSORIES

DISCHARGE AIR NOZZLE KIT ASSEMBLY
The optional discharge nozzle kits are used to direct the conditioned air to a specific
target area. By concentrating the airflow, the nozzles increase the air
velocity towards production lines to cool personnel and/or equipment. In server
rooms, the nozzles can be used to direct the airflow through the rack to remove the
hot air from the area of the equipment.
NK-1
for model OWC12, with (2) 4-inch diameter nozzles with an approximate
compressed length of 15 inches. The approximate extended length is 21 inches.
2NK-2
for models OWC18 and OWC24 with (2) 6-inch diameter nozzles with an
approximate compressed length of 22 inches. The approximate extended length is
32 inches.
2NK-3
for model OWC36 and OWC60 , with (2) 8-inch diameter nozzles with an
approximate compressed length of 20 inches. The extended length is approximately
29 inches.
The nozzle kits come pre-assembled with the nozzles secured to a mounting plate,
and with edge guards. By removing the OWC discharge grille, you can insert the
nozzle kit into the opening without the use of tools.
8