OCEANAIRE OWC Series Engineering, Installation And Service Manual page 14

SPECIAL ORDER ITEMS
In some applications, units can be manufactured with optional components for add-
ed performance and longevity. Below are a few of the OWC options that are availa-
ble.
Consult your distributor for pricing and availability.
CUPRO-NICKEL CONDENSER
When chemically treated water, salt water or brine, is used in the condenser coil, it
is recommended that the OWC be equipped with a 90/10 Cupro-Nickel condenser
coil.
HIGH PRESSURE WATER VALVE
For applications where water supply pressures exceed 150 psig, a high pressure
water regulating valve can be installed in the OWC. Valves designed for use with up
to 350 psig water inlet pressure are available.
HERESITE TREATED EVAPORATOR COIL
For use in chemically corrosive environments, the OWC can be manufactured with
a Heresite® coated evaporator coil for improved coil life.
HOT GAS BYPASS VALVE
In applications where low evaporator temperatures may occur, an optional hot gas
bypass valve can be installed to regulate the evaporator temperature. The bypass
valve feeds refrigerant (hot gas) into the evaporator to avoid low ambient freeze-ups.
MARITIME WATER VALVE
Cast naval bronze body with MONEL parts. MONEL is a "natural alloy" and is highly
resistant to corrosion.
TOWER UNITS
In applications where the OWC is connected to a closed-loop condenser water cir-
cuit, a unit can be built for direct water connection WITHOUT a water valve.
12