Lenovo ThinkSystem SD550 V3 System Configuration Manual page 56

Identifying your system
When you contact Lenovo for help, the machine type, model, and serial number information help support
technicians to identify your system and provide faster service.
The illustration below shows the location of the ID label which contains the chassis model number, machine
type, and serial number of the chassis. You can also add other system information labels to the front of the
node in the customer label spaces.
Figure 17. Location of the ID label on the chassis
Table 14. ID label on the front of the chassis
ID label
1
The node's model number can be found on the front of the node, as shown in the following illustration.
Lenovo XClarity Controller network access label
In addition, the Lenovo XClarity Controller network access label for the node can be found on the pull-out
information tag located at the front of the node. This pull-out information tag also shows the bay numbers of
the hot-swap drives. You can use the information on the pull-out tag to access the XCC MAC address and
LLA for the node. The left node information is at the left bottom side, while the right node information is on
the right upper side. You can also use the information tag for your own node labeling information, such as the
hostname, the system name, and the inventory bar code.
ThinkSystem SD550 V3 System Configuration Guide
48