Table of Contents
Advertisement
Installation Procedures
3.3.4 Mounting Photo-Eye and Reflector Side Guides
Refer to the Accuglide ZoneFlex Installation Manual.
3.3.5 Mounting the ZoneFlex Modules
1.
Assemble the ZF module to its adapter bracket by placing the small square extension
on the back of the module through the square hole in the module bracket.
2.
Fasten the ZF module to the bracket by sliding the clip in place.
3.
Mount the ZF module and adapter bracket to the frame using the 3/8 in x 3/4 in
carriage bolts and flange hex nuts.
4.
Position the modules and adapter brackets between the photo-eyes as described in
the next section.
18
Accuglide ZoneFlex | Retrofit Guide | 29349913
April 6, 2016
Advertisement
Table of Contents
