Advertisement
5. Using a screwdriver, secure the back panel to the left side panel with the (4) provided screws.
Step 2: Bench supports and left panel.
1. Set the left panel in place and secure the panel with the (4) additional screws.
2. Place the bench support. Plug in the heater cable from the bench support to the back wall. Plug
the floor cable into the back wall.
3. Slide the top bench on the bench support.
4. Slide the bottom bench on the lower bench support.
A. Installation & Maintenance
Salus Saunas | 6
© Finnmark Designs
Advertisement
