Advertisement
Question
Control panel is beeping
and showing an error
message.
There is no heat coming
from my front heaters.
All other Sound System
problems:
What are the electrical
requirements for my new
sauna?
My new sauna is completely
dead.
E. Troubleshooting Guide
Answer
The temperature sensor inside your control panel housing has been
•
disconnected. Remove control panel and confirm the two pin connection is
securely fastened.
First thing you want to do is check the white Molex connection inside the
•
sauna. It's located at the top left of the sauna if you're sitting on the bench.
You want to make sure that it is plugged in correctly.
Check heater power cable connections on the power supply.
•
Unplug the sauna, wait 10 minutes, then plug back in.
•
•
Orion & Hercules XL = 15a 120v 1750 watts
•
Harvia™ Vega Compact
electrician)
Make sure the power cord is plugged into the sauna power supply and the
•
other end is plugged into the wall socket.
Try pressing breaker button on the sauna power supply.
•
Unplug the sauna and plug something else, such as a lamp or radio, into the
•
wall socket to verify there is power to that socket. If there is no power, check
the house circuit breaker for that line.
Salus Saunas | 22
= 20a 120v 1900 watts (need an
© Finnmark Designs
Advertisement
